These products are discontinued and are no longer supported.
The replacement for the TLP2824 and LP2824 is the TLP2824 Plus and LP2824 Plus.
For more details on the TLP2824 Plus and LP2824 Plus click here: https://www.zebra.com/us/en/products/printers/desktop/compact-desktop-printers.html
The replacement for the TLP3842 is the GX430.
For more details on the GX430 click here: https://www.zebra.com/us/en/support-downloads/printers/desktop/gx430t.html
The replacement for the TLP2844 and LP2844 is the GC420.
For more details on the GC420 click here: https://www.zebra.com/us/en/products/printers/desktop/value-desktop-printers.html
The below Knowledge Article is for your reference only and is no longer updated.
There are 3 options you can use to view the printer's internal settings or configuration:
1. Run the Autosense procedure on the printer to print out the printer's internal settings. Read More>>
2. Send the EPL command U to the printer to print out the printer's internal settings. Read More>>
3. Send the EPL command UQ to the printer to return the settings back to the host. Read More>> You will need a bi-directional application like Hyper-terminal, Tera-Term, or the Direct Communications windows of the Zebra Setup Utility to receive data back from the printer. Read More>>
Additional Information
EPL2 Programming Manual Read More>>