Installing a Network Zebra Printer on a Windows 10 PC

Once you've installed the printer driver or Zebra Setup Utilities, follow these steps: 

Procedure:

1. Navigate to the Windows Control Panel and select Devices and Printers.
   
   
2. Click Add a printer. 
   
   
3. Click The printer that I want isn’t listed. 
   
   
4. Select the Add a local printer or network printer with manual settings option and click Next.
   
   
5. Select Create a new port and select ZDesigner Port Monitor from the drop-down menu. 
   
   
6. Enter the printer IP address in both the empty fields, click OK, and click Next.
    

   NOTE If you need help finding the IP address, refer to Choosing & Assigning an IP Address Using Zebra Setup Utilities (ZSU) article.

   
   
7. From the left panel, select ZDesigner and select the printer model on the right. Click Next.
    

   IMPORTANT! Do take note of the printer resolution expressed in dpi.

8. Optionally, change the printer's name and click Next.
   
   
9. From Printer Sharing, select the option that fits your needs. 
   
   
10. Click Print a test page to test the communication between the computer and your printer. Click Finish to end.
    
    

User Manuals for the ZebraNet Print Servers:

• ZebraNet 10/100 User Guide  
• ZebraNet II User Guide  

Status Indicators for the ZebraNet Print Servers:

• Internal and External Print Server II   
• Internal and External 10/100 Print Server  

Helpful Information:

• Setting up and Troubleshooting a Printer for a Wireless Network
• Configuring Connectivity for Wired or Wireless Networks Using the Zebra Setup Utilities
• Changing the Wired TCP/IP Settings Through the ZT410 or ZT420 LCD Menu of the Printer
• Wired and Wireless Printers Dropping off the Network
• Configure Zebra Printer Wired / Ethernet IP without Network Connection
• Installing a Network Zebra Printer on a Mac
• Preview a ZPL Label with a Network Printer