To enter recovery mode in CC600 or CC6000 using device keys/buttons, you can use the following two options:
Option 1:
- Press and hold the Reset button until the Restart option appears.
- Release the Reset button when the Restart option appears. The device restarts if the button is held down for longer than 3 seconds.
- Touch Restart.
- Press and hold the Number 1 button. The System Recovery screen appears.
- To navigate, press the Number 2 button. To select an option/action, press Number 1.
Option 2:
- Disconnect and connect power to the device.
- Press and hold the Number 1 button before the Zebra logo splash screen appears.
- The System Recovery screen appears.
- To navigate, press the Number 2 button. To select an option/action, press Number 1.
Helpful Information: