Salesforce

Configure Zebra Printer Wired / Ethernet IP without Network Connection

« Go Back

Information

 
Issue / QuestionConnecting printer to a PC via direct LAN/RJ45
Applicable ToZebra printers with Ethernet connectivity.
Resolution / Answer
  • In order to send the network configuration to the printer, the printer must be connected and installed on a computer using the USB cable.


Steps to be taken :

1.Configure your computer IP address to static IP

Go to Control panel > Network and Internet > Network and Sharing Center > Click on Local Area Connection > Properties > Highlight on “Internet Protocol Version 4(TCP/IPv4) > Click on “Properties” > Choose “Use following IP address:"



2. Setup printer static IP address on same range as your computer IP (via USB cable)

E.g. : -



Note: Restart the printer manually once successfully configured Printer IP

3. Test your connectivity by using command prompt(CMD)
Example: ping 192.168.1.15



4. Or browse to the printer IP address to check the connection:



Additional Information

URL NameConfigure-Zebra-printer-Wired-Ethernet-IP-without-Network-Connection
TitleConfigure Zebra Printer Wired / Ethernet IP without Network Connection

Powered by