Resolution / Answer | Procedure:
- Navigate to Devices and printers, right-click the ZDesigner Driver, and select Printing Preferences.
- In the Printing Preferences window, open the Advanced Setup tab, and click Other.
- Navigate to the Backfeed section, and select the No backfeed button.
- Perform a Windows Test print to apply the new setting, or run the following ZPL string:
- Navigate to Devices and printers, right-click the ZDesigner Driver, and select Printing Preferences.
- In the Printing Preferences window, open the Tools tab, and click Other > Send command, and enter ~JSO^XA^JUS^XZ in the text field.
- Click Send and Apply.
- The printer is now set to no backfeed.
ZDesigner Driver Version 8 or Version10
- Navigate to Devices and printers, right-click the ZDesigner Driver, and select Preferences.
- Select Print Options.
- Navigate to the Backfeed section, and select the No backfeed drop-down button.
Helpful Information:
|
|
---|