Salesforce

Suppress 2-Key Report Printing after Upgrading the Firmware

« Go Back

Information

 
Issue / Question- Suppress 2-key report printing after upgrading the firmware
- The default setting is to print 2-key reports after upgrading the firmware
Applicable ToApplies to all printer
Resolution / Answer
To suppress the printing of 2-key reports after upgrading the firmware, configure the printer by sending the SGD command below:
! U1 setvar "device.print_reprogram_2key" "off"


Keywords: 2 key, 2key, two-key, two key
URL NameSuppress-2-key-report-printing-after-upgrading-the-firmware
TitleSuppress 2-Key Report Printing after Upgrading the Firmware

Powered by