Information

Issue / Question	- Suppress 2-key report printing after upgrading the firmware - The default setting is to print 2-key reports after upgrading the firmware

Applicable To	Applies to all printer

Resolution / Answer

To suppress the printing of 2-key reports after upgrading the firmware, configure the printer by sending the SGD command below:

! U1 setvar "device.print_reprogram_2key" "off"

Keywords: 2 key, 2key, two-key, two key

URL Name	Suppress-2-key-report-printing-after-upgrading-the-firmware

Title	Suppress 2-Key Report Printing after Upgrading the Firmware

Suppress 2-Key Report Printing after Upgrading the Firmware