Using the ZebraNet Print Server Web Page to Configure the Printer

Requirements

• Ensure that you use a Windows browser and a network-connected printer.
• Ensure your printer is capable of being connected to the network. For your IP address, reach out to your network administrator. Alternatively, refer to this article: Identifying Your Printer's IP Address on a Printer without an LCD Control Panel.
   

NOTE On some older printers, bi-directional support must be enabled. This is a selection in the LCD under the parallel port.

Overview

The ZebraNet Print Server supports HTTP communications and will display a web page when accessing the printer's IP Address. From this web page, the printer configuration can be set. 

Procedure:
 

1. From a PC connected to the printer's network, open a browser window.
2. Type the IP Address of the printer into the browser's URL address window.
3. The printer's web page will be displayed.

5. Select View and Modify Printer Settings.
6. Enter the password 1234.
7. Now, you can configure your printer settings and select the Submit button to send the configuration to the printer.

For information on the printer configurations:

• Refer to General Setup for more information.
• Refer to Serial Communications Setup for more information.
• Refer to Network Configurations for more information.
• Refer to RFID Setup for more information. 
• Print Listings on Label - Select the printer information you want to be printed on the label.
• Refer to Media Setup for more information. 
• Refer to Calibration Setup for more information.  
• Refer to ZPL Control Setup for more information.  
• Refer to Advanced Setup for more information.  

8. When you have completed setting your printer configuration, return to the View and Modify Printer Settings Page and select Save Current Configurations.
    

If the printer has an LCD, it can be used to configure and save the printer settings. In addition to the methods described above, you can use one of the following utilities or drivers to perform printer setup and configuration.
 

Helpful Information:

• Support and Downloads: ZebraNet Wireless Print Server User Guide
• Using the ZebraNet Print Server Web Page to Configure a Permanent IP Address
• Resolving Print Quality Issues on ZT410 and ZT420 Printers
• ZT410 and ZT420 Printers: Solving Media Out Errors and Calibrating the Printer
• Resolving Print Quality Issues on GX, GK and GC Series Desktop Printers
• Configure or Modify Basic ZDesigner Driver Version 8 Settings
• Configure or Modify Basic ZDesigner Driver Version 5 Settings
• Variable Length Printing Supported by Zebra V10 Driver
• Install Zebra Printer Using Driver v10
• Configure Zebra Printer Wired / Ethernet IP without Network Connection