Link/Activity Indicator (Green)
| Off | No Link (Disconnected) |
| On | Network Link has been established |
| Blinking | Network Activity has been detected |
Speed Indicator (Orange)
| Off | No Link (Disconnected) |
| 1 Blink | The LED blinks once (one blink, pause, one blink. etc) when a 10Base Link has been established |
| 2 Blinks | The LED blinks twice (two blinks, pause, two blinks. etc) when a 100Base Link has been established |
If both LEDs are off, the printer has not detected the presence of a network cable.
To solve the problem follow these 4 steps:
- Verify that the network cable is appropriate and has an RJ-45 connector.
- Remove the network cable from the printer. Plug the network cable back in until you hear a positive click.
- Check the other end of the cable in the same manner. If the printer still does not detect a cable, then continue.
- Connect the printer to a known good network. If the printer is still unable to detect the network cable, contact Technical Support for assistance.
