Salesforce

ZD Series: Enable the Forced Download Mode to Accept Firmware

« Go Back

Information

 
Issue / QuestionHow to enable forced download mode in ZD series printers?
Applicable ToZD410, ZD420, ZD620
Resolution / Answer

Follow the steps provided below to enable the forced download mode in ZD series printers when accepting firmware.

  1. With the printer powered OFF, press and hold PAUSE + FEED + CANCEL buttons.
  1. Keep the 3 buttons pressed while powering ON the printer. 
  2. Keep holding the buttons until the status and pause light starts flashing orange.
  3. Now, the printer is ready to receive the firmware file.

For information on sending the firmware to the printer, refer to the following article: Using the ZDownloader Utility Available from the Zebra Website.

 
URL NameZD-Series-forced-download-mode-to-accept-firmware
TitleZD Series: Enable the Forced Download Mode to Accept Firmware

Powered by