Salesforce

Quick Start Guide: ZT210, ZT220 And ZT230

« Go Back

Information

 
Issue / QuestionHow to unpack and set up the ZT200 Series printers?
Applicable ToZT210, ZT220, ZT230
Resolution / Answer
The Quick Start Guide: ZT200 Series illustrates how to unbox your Zebra Printer, download the Zebra Setup Utilities, and load supplies.
 
How to Download Zebra Setup Utilities and Turn On the Printer

The steps below illustrate how to unbox the printer, download Zebra Setup Utilities and turn on the printer.

Procedure:











How to Load Labels And Ribbon Into the Printer

Refer to the steps below to learn how to load labels and ribbon into the printer and unpause it.

Procedure:






 





















How to Print a Test Configuration Label

To verify that the media and ribbon are loaded correctly, print a printer configuration label.
Below are 2 ways to accomplish this:

A. Manual method (from Quick Reference Guide )
    1. Press and hold the CANCEL (X) button.
    2. Turn on (I) the printer.
test_label_manual.png
        If the media and ribbon (if used) are loaded correctly, the printer prints a printer configuration label.

B. Through Zebra Setup Utilities (from User Guide )
    1. Open the Zebra Setup Utilities to return to the Zebra Setup Utilities screen.
test_label_zsu (2).png
    2. Click on one of the available print drivers for your printer.
    3. Click Open Printer Tools. The Tools window displays the available printer commands
test_label_zsu (3).png
    4. Click Send to print a printer configuration label.  

If your connection is working correctly and your printer is correctly loaded with media and ribbon (if used), a printer configuration label prints.


Helpful Information:
URL NameZT210-ZT220-ZT230-Quick-Start-Guide
TitleQuick Start Guide: ZT210, ZT220 And ZT230

Powered by